ISSN 2456-0235

INDEXED IN 

International Journal of Modern Science and Technology

​​​​​​​International Journal of Modern Science and Technology, Vol. 2, Special Issue 1, 2017, Pages 52-59. 


Hardware and Simulation Design of Voltage and Frequency Regulations in a Grid Connected System using Solar PV Model

A. Anbumani, C. Venkatesan, M. Thiyagarajan
Department of Electrical and Electronics Engineering, Arasu Engineering College, Kumbakonam – 612 501. India.

*Corresponding author’s e-mail: anbuer21@gmail.com

Abstract
In this paper presents automatic voltage and frequency regulations in a grid connected solar PV systems using SEPIC Converter with Fuzzy Logic Controller (FLC). This method allows effective control over active and reactive power available from the grid to PV system and vice-versa. A SEPIC converter is used to improve the performance of the system and also increasing the efficiency in better manner. The PV plant and the battery storage are integrated with the grid with the help of dc-dc and dc-ac converters in such a way that bi-directional flow of active and reactive powers can be achieved. When up regulation is occurred energy is transferring from PV to grid for regulate the voltage. Similarly, when down regulation is occurred energy transferring from grid to PV to regulate the frequency. Controllers integrating energy sources respond to the received signals and attempt to fulfill the grid demand. The system response is almost instantaneous and thus can be very helpful in frequency and voltage regulation.

​​Keywords: Solar array; Maximum Power Point Tracking; Three phase inverter; Fuzzy Logic Controller; Voltage Regulation.

References

  1. Ravi B, Badrul C, Grid Frequency and Voltage Support using PV Systems with Energy Storage. Masters Theses, Student Reasearch & Creative Works, Scholars’ Mine.
  2. Ravivarman S, Samydurai T. Optimized Grid Power Injection with Maximum Power Point Tracking using Cascaded SEPIC Converter and Three Phase Inverter. International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering. 2015;4: 222-230.
  3. Sachin J, Vivek A. A Single-Stage Grid Connected Inverter Topology for Solar PV Systems with Maximum Power Point Tracking. IEEE Transactions on Power Electronics. 2007;22(5):1928-1940.
  4. Yu H, Pan J, Xiang A. A multi-function grid-connected PV system with reactive power compensation for the grid. Solar Energy, 2005;79:101-106.
  5. Anusuya V, Vishnupraba G. MPPT using Fuzzy Logic Controller for SEPIC converter and three phase inverter. International Journal of Advanced Research in Computer and Communication Engineering. 2015;4(4):216-221.
  6. Serban I, Ion C.P, Marinescu V, Georgescu M. Frequency Control and Unbalances Compensation in Autonomous Micro-Grids Supplied by RES. IEEE International Electric Machines & Drives Conference, 2007.
  7. Lokanadham M. Incremental Conductance Based Maximum Power Point Tracking (MPPT) for Photovoltaic System. International Journal of Engineering Research and Applications. 2012;2: 1420-1424.
  8. Emilio M, Giovanni P, Giovanni S. Design of a Sliding-Mode-Controlled SEPIC for PV MPPT Applications. IEEE Transactions on Industrial Electronics. 2014;61:3387-3398.
  9. Ebrahim B, Esmaeel SM. Calculation of Output Voltage Ripple and Design Considerations of SEPIC Converter. IEEE Transactions on Industrial Electronics. 2014;61:1213-1222.
  10. Park J, Ahn J, Cho B, Yu G. Dual-module-based maximum power point tracking control of photovoltaic systems. IEEE Trans Ind Electron. 2006;53:1036-1047.
  11. Esram T, Chapman P.L. Comparison of photovoltaic array maximum power point tracking techniques. IEEE Trans Energy Convers. 2007;22:439-449.